A washing machine is one of the most indispensable household appliances in the house, providing cleanliness and comfort in everyday life. However, like any equipment, it can break down over time. From water leaks to problems with spinning, the causes of breakdowns can be very different. Understanding the most common malfunctions and how to fix them will help not only extend the life of the device but also avoid unnecessary costs. In this article, we will look at typical washing machine breakdowns and effective methods for eliminating them. And if you live in Florida and do not want to do the repairs yourself, then appliance repair in Pembroke Pines from Spark Service PRO will be an excellent solution.
When dealing with washing machine breakdowns, it’s crucial to ensure that any replacement parts are reliable and durable. Opting for high-quality washing machine parts can significantly extend the lifespan of your appliance and improve its performance. These parts are designed to fit perfectly and function seamlessly, reducing the risk of future malfunctions. Whether it’s a faulty motor, a broken pump, or a worn-out belt, using top-notch components can make all the difference. By investing in superior parts, you not only enhance the efficiency of your washing machine but also save money in the long run by avoiding frequent repairs.
The Water Does Not Drain From the Tank
First, unplug the washing machine and inspect the drain hose along its entire length. It should not be pinched or kinked, as this prevents the free flow of water. If the hose is OK, try cleaning the drain pump filter after draining the water from the system. You can read about its location in the instructions. So, unscrew the filter and clean it of foreign objects (threads, paper clips, buttons, laces, etc.). Debris may also be in the pipe that connects the tank and the pump.
Before washing clothes, you need to turn out pockets, check how well the zippers, buttons, and other small parts are held.
Check the drain pump itself at the same time, as its impeller could be blocked by threads or hair that has seeped through the filter. Sometimes a thread or hair can be wound directly onto one of the pump parts.
Too Long a Washing Cycle
Sometimes it happens that the washing cycle increases — the washing machine works two or even three times longer than it should. Such breakdowns of the washing machine most often occur due to a faulty heating element. In this case, the water temperature does not reach the required level, the temperature sensor does not give the command to continue washing, and the washing machine hangs in one place.
Such a failure can also occur if the washing machine is connected incorrectly: the collected water immediately drains into the sewer, and the washing cycle continues incorrectly.
Other reasons for too long washing can be:
- weak water pressure
- clogged filter
- dirty or kinked water supply hose
- electronic failure
You cannot use handwashing powder in an automatic washing machine because it creates a lot of foam.
Water Leaks
With new equipment, such a problem occurs only due to a manufacturing defect or poor assembly. In this case, immediately contact the service center for free repairs.
If a washing machine that has been in service for many years is leaking, and the warranty no longer applies to it, you can try to figure out the problem yourself. First, inspect the drain hose and the cold water supply hose for breaks or cracks at the joints and in places of bends. If there are any, you need to buy a new hose.
There may be more serious reasons that you can identify yourself, but to eliminate them, it is better to contact specialists, for example, Spark Service PRO, who specialize in appliance repair services. For example, a side-loading washing machine often leaks due to a loss of tightness of the rubber cuff. This usually happens to those users who constantly close the door, which is why the sealing material does not dry out and becomes loose.
Water may also leak from the powder dispenser hopper. This may be due to the following reasons:
- the water pressure is too strong.
- the dispenser is overfilled with powder (the water does not have time to drain into the tank when filling, overflows the dispenser, and flows down the front wall of the machine).
- the dispenser is clogged with old detergent.
The Washing Machine Does Not Fill With Water
This is a very common malfunction, in which the washing machine either does not fill with water at all, or does so very slowly. Before calling specialists, it is worth checking:
- whether the water supply valve is open.
- whether the filter is clogged.
To clean the filter, unscrew the water supply hose, remove the mesh with pliers, and rinse it thoroughly. If all these measures do not give results, then there is no point in looking for the cause of the malfunction on your own. Perhaps the inlet valve or water level relay is broken, or perhaps the electronic module is out of order.
The Water in the Washing Machine Does Not Heat Up
The cause of this problem often lies in the heating element. It can fail for the following reasons:
- short circuit
- voltage surges
- long service life
- hard water
Today, a lot is said about scale, which settles on the metal surface of the heating element, destroys it, and impairs heat exchange with water. Based on many years of experience, the service life of the heating element depends on the washing temperature (it deteriorates faster if boiled frequently).
The problem with water heating can also arise due to incorrect connection, when the collected water spontaneously goes into the sewer without having time to heat up. The temperature sensor responsible for heating the water or the electronic module on which all processes occurring in the washing machine depend can also fail.
Shaking and Strong Vibration During Spinning
Strong vibration of the washing machine during spinning is a signal of improper installation or malfunction. There are many reasons for this:
- unstable support
- overload and uneven distribution of laundry
- wear of rubber shock absorbers
- destruction of the counterweight or loosening of its fastening
- bolts fixing the drum have not been dismantled
First of all, check the stability of the washing machine (it should stand firmly on the base). If the floor is wooden and sags, then vibrations cannot be avoided. Also, check the legs, which can spontaneously unscrew during operation. If necessary, tighten them with a lock nut.
Wrapping It Up
Knowing the main symptoms and causes of washing machine breakdowns, you can take timely measures and avoid serious issues. From simple blockages to failure of electronic components, each malfunction requires an individual approach. If you are confident in your abilities, you can try to fix some problems yourself. However, in most cases, it is wiser to entrust the equipment to professionals. For Florida residents, high-quality appliance repair services in Pembroke Pines from Spark Service PRO will ensure a quick restoration of the washing machine without unnecessary hassle.